New England Ropes - Finish Line
Product Description:
Finish Line is a 100% polyester pre-stretch with an 8-strand "nubby" cover and continuous filament core.
Features:
- Low Stretch
- Durable Cover
- Great hand
- Flexible & easy to knot
Applications:
- Dinghy Outhauls
- Cunninghams
- Centerboard Lines
- Halyards
- Vang Systems
- Hiking Strap Lines
- Topping Lifts
Colors Available:
Lengths Available:
| Size | Weight | Tensile |
|---|
| lbs/100' | g/m | lbs | kg |
|---|
| 4mm | 0.8 | 11.9 | 900 | 409 | | 5mm | 1.3 | 19.3 | 1,350 | 613 | | 6mm | 1.7 | 25.3 | 2,100 | 953 | | 1.8mm | 0.2 | 3.0 | 350 | 159 | | 2.8mm | 0.4 | 6.0 | 1,200 | 545 | | 3.8mm | 0.8 | 11.9 | 1,900 | 863 | | 4.8mm | 1.3 | 19.3 | 2,500 | 1,135 |
Sunlight/UV:
Very little degradation from sunlight. Can be used outside over long term if inspected regularly.
Chemicals:
Polyester has good resistance to most chemicals except 95% sulfuric acid and strong alkalines at boil.
Heat:
Polyester melts at 480°F with progressive strength loss above 300°F.
Dielectrics:
Good resistance to the passage of electrical current. However, dirt,
surface contaminants, water entrapment, and the like can significantly
affect dielectric properties. Extreme caution should be exercised any
time a rope is in the proximity of live circuits.
Sheaves:
Recommended sheave diameter to rope diameter is 8:1.
Working Loads:
No blanket safe working load (SWL) recommendations can be made for any
line because SWL's must be calculated based on application, conditions
of use, and potential danger to personnel among other considerations.
It is recommended that the end user establish working loads and safety
factors based on best practices established by the end user's industry;
by professional judgment and personal experience; and after thorough
assessment of all risks. The SWL is a guideline for the use of a rope
in good condition for non-critical applications and should be reduced
where life, limb, or valuable property is involved, or in cases of
exceptional service such as shock loading, sustained loading, severe
vibration, etc. The Cordage Institute specifies that the SWL of a rope
shall be determined by dividing the Minimum Tensile Strength of the
rope by a safety factor. The safety factor ranges from 5 to 12 for
non-critical uses and is typically set at 15 for life lines.
Splicing Instructions:
Not Spliceable
*** Sold by the foot ***
Please contact us for a quote on another color or size.
|